Power Distribution Module--EP-Z1

EP-Z1 Domain Control Module

1. Product Dimensions: 297mm (L) × 230mm (W) × 53mm (H);

2. The humanistic literacy design on the flip cover;

3. Equipped with fully imported chips;

4. 1 channel of 120A high-current output with configurable output logic, supporting 150A for 20 minutes and 200A for 2 minutes;

5. 7 channels of 50A output, especially suitable for electrical equipment with large inrush current such as ATS fans and window breakers;

6. High-power output with configurable output logic, enabling open-circuit/short-circuit detection and output current detection for load output;

7. 6 channels of 25A output and 20 channels of 9A output, among which 2 channels of 9A can realize direct constant-power output control without any configuration;

8. 2 channels of 200A high-current input (one connected to the storage battery, the other to DC/DC), with internal parallel connection;

9. 8 channels of configurable high/low-level switch input (2 channels of high-active, 1 channel of low-active), and 2 channels of 0-500Ωresistance sensor input (compatible with 0-5V voltage input);

10. Operating Voltage: 18-32V;

11. Operating Temperature: -40℃ ~ 85℃;

12. Normal Sleep Current: ≤ 35mA (Note：Test data at 24V rated voltage);

13. Deep Sleep Current: ≤ 5mA (Note：Test data at 24V rated voltage);

14. Total Module Output Current: ≤ 150A (Note: Test data at 24V rated voltage);

15. IP65 Test Report (CNAS-certified);

16. EMC Test Report (CNAS-certified).